Alpine MRA-F350 Theater Amplifier

Wikispecs.org - The Largest Product Database,the biggest product specifications database in the world

The MRA-F350 is the key to upgrade your system to step your listening experience up to multi-channel sound. All you have to do is add an Alpine compatible source unit, subs and speakers, and you can enjoy multi-channel sound with movies and music. 5.1 channel music puts you right in the middle of a wide and deep sound field. With front, rear and center speakers plus a subwoofer, the sound is richly detailed and realistically positioned. You have to hear it to believe it, experience only the best of multi-channel music with Alpine.

FEATURES

Crossover (HP/LP)
5 Channel Operation
Adjustable Crossover (HP/LP)
Auto Overcurrent Protection
Bass Engine®
Bass Management
Cross-Vented Chassis Design
DC-DC PWM Power Supply
Darlington Bi-Polar Outputs
Discrete Pre-Amp Stage
Gold Plated Power Screw Terminals
Gold Plated RCA Jacks
Gold Plated Speaker Terminals
MOSFET Power Supply
Manual Time Correction
Non-Fading Pre-Amp Output
Parametric Equalizer
Phase Selector
STAR Circuitry
Solid Copper Bus Bars
Subsonic Filter
Thermal Managment Processor
Top Mounted Blue LED Power/Status Indicator
Triple Darlington in Push-Pull Configuration

SPECIFICATIONS

CEA-2006 Power Rating (40hm@14.4V = 1%THD+N), S/N 100dBA (Ref. 1W into 4Ohm):
- 50W x 5 (0.08% THD)
RMS Power (at 12V THD+N,20Hz-20kHz)
- Per channel into 4 ohms, S/N 100dBA (Ref. 1W into 4Ohm): 50W x 5 (0.08% THD)
Bass Engine®
- Crossover Frequency Adjustment : 20 - 200Hz: 1/3 oct step (1/2ch, 3/4ch), 20 - 400Hz: 1/3 oct step (5ch), 20 - 200Hz: 1/12 oct step (6ch, LP/OFF)
- Crossover Network : 6/12/18/24dB
- Parametric EQ (Bands) : 17 (Front: 5, Rear: 5, Center: 5, Subwoofer: 2)
- Parametric EQ (Level) : ±9dB
- Parametric EQ (Width (Q)) : 0.5/1/2/3/4/5
- Parametric EQ Frequency : 20 - 20kHz (1/6 oct step)
- Subsonic Filter (Selectable) : 20 - 50Hz, 1/6 oct step, slope: 6/12/18/24
General
- Heat Sink (WxHxD)mm : 285mm x 60mm x 242mm
- Input Impedance : 10k Ohm
- Input Sensitivity (V/at 10k ohms) : 0.85V (Ai-NET)
- Power Requirements : 14.4V DC (11V to 16V)
- Signal to Noise (S/N) : 80dBA