Crest CPX1500 Power Amplifier
Wikispecs.org - The Largest Product Database,the biggest product specifications database in the world
CREST POWER AT AN AFFORDABLE PRICEBUILT IN CROSSOVEREach channel has a built in crossover @ 150 Hz. So you can use one amp for your subwoofer and full range speakers.2 OHM POWERNo other amplifier series in this price range can be driven at 2ohms. This amp will work all day in a 2 ohm load situation.BUILT IN LIMITER AND ON/OFF MUTINGThe CPX amplifiers has a built in limiter to protect against overloading the amplifier. And a Mute system that mutes the amplifier when turned on or off so their is no popping.
Crest CPX1500 Power Amplifier
Features:
- GCL Gain Comparator Limiting system
- Rear panel defeat switch
- Built-in Crossover
- 150 Hz 24 dB per octave Linkwitz-Riley filter, tuned for subs
- Individual in/out switches for Channels A and B
- 1/4" daisy chain outputs
- Input connectors--Barrier strip, Female XLR 1/4" TRS
- Rear panel polarity switches for XLRs
- Pin 2 hot
- Outputs connectors
- Speakons for Ch A and B and Bridged mono
- Binding posts for Bridge mode
- Mode selector switch for stereo and bridged-mono operation
- Two-speed DC Fan
Specifications:
- Stereo power: @ 8 ohms: 300W; @ 4 ohms: 500W; @ 2ohms: 750W
- Hum & noise Stereo:4 ohms: 100 dB
- Impedance @ 4 ohms: 1.12V RMS (+1 dBv)
- Unbalanced, 1/4" phone jack: 20K Ohms balanced, XLR: 10K Ohms
- Overall system gain per channel: 40X (+32dB) distortion SMPTE-IM: less than 0.01%
- Stereo mode, both channels driven, 4 ohms 20 Hz to 20 KHz, 10dB below rated power: less than 0.03% 20Hz to 2 KHz, at full rated power: less than 0.03%
- Frequency response: 4 ohms: 20Hz to 20kHz+0,-3dB @ rated output
- Dimensions: 3.5"H x 19"W x 14"D 8.9 cm H x 48.3 cm W x 35.6 cm D
